Back
| Type | Halogen lamp |
| Compatibility | NANOCOLOR® UV/VIS II and NANOCOLOR® VIS II |
| Power Consumption | 20W |
| Average Lifespan | 2000 hours |
| Wavelength Range | 350-900 nm |
| Color Temperature | 3200 K |
| Voltage | 12V |
| Base Type | G4 |
| Size | 35 x 20 mm |
| Beam Angle | 360 degrees |
| Light Output | 700 lumens |
FAQ
What is a Halogen lamp and how does it work in the NANOCOLOR® UV/VIS II and NANOCOLOR® VIS
II?
The Halogen lamp is the light source used in the NANOCOLOR® UV/VIS II and NANOCOLOR® VIS II instruments. It provides a stable and intense light source for accurate spectrophotometric measurements. The lamp works by passing an electric current through a tungsten filament, which causes the filament to heat up and emit light in the visible and near-infrared range.
What are the benefits of using a Halogen lamp in the NANOCOLOR® UV/VIS II and NANOCOLOR® VIS II?
The Halogen lamp offers several benefits for spectrophotometric measurements. It provides a stable and consistent light source, ensuring accurate and reliable results. The lamp also produces a broad spectrum of light, covering the UV, visible, and near-infrared ranges, making it suitable for a wide range of applications. Additionally, the Halogen lamp has a long lifespan, reducing the need for frequent lamp replacements.
How do I replace the Halogen lamp in my NANOCOLOR® UV/VIS II or NANOCOLOR® VIS II instrument?
Replacing the Halogen lamp in your NANOCOLOR® UV/VIS II or NANOCOLOR® VIS II instrument is a simple process. First, make sure the instrument is turned off and disconnected from the power source. Open the lamp compartment door, typically located on the front or top of the instrument. Carefully remove the old lamp by unscrewing it from its socket and disconnecting any wiring. Insert the new lamp into the socket and secure it in place by tightening the screws. Close the lamp compartment door and power on the instrument to ensure the new lamp is working properly.
How often should I replace the Halogen lamp in my NANOCOLOR® UV/VIS II or NANOCOLOR® VIS II instrument?
The frequency of Halogen lamp replacement depends on several factors, including the usage of the instrument and the specific requirements of your applications. In general, it is recommended to replace the lamp every 1000-2000 hours of use or if you notice a decrease in the intensity of the light source. Regular maintenance and calibration of the instrument can help prolong the lifespan of the Halogen lamp and ensure optimal performance.
Are there any precautions I should take when handling the Halogen lamp in my NANOCOLOR® UV/VIS II or NANOCOLOR® VIS II instrument?
When handling the Halogen lamp in your NANOCOLOR® UV/VIS II or NANOCOLOR® VIS II instrument, it is important to take certain precautions to ensure your safety and the proper functioning of the instrument. Always make sure the instrument is turned off and disconnected from the power source before replacing the lamp. Avoid touching the lamp with bare hands, as oils and residues from your skin can damage the lamp. Use gloves or a clean cloth to handle the lamp and avoid touching the glass surface. Additionally, be careful not to over-tighten the screws when installing the lamp to prevent damage to the socket.
The Halogen lamp is the light source used in the NANOCOLOR® UV/VIS II and NANOCOLOR® VIS II instruments. It provides a stable and intense light source for accurate spectrophotometric measurements. The lamp works by passing an electric current through a tungsten filament, which causes the filament to heat up and emit light in the visible and near-infrared range.
What are the benefits of using a Halogen lamp in the NANOCOLOR® UV/VIS II and NANOCOLOR® VIS II?
The Halogen lamp offers several benefits for spectrophotometric measurements. It provides a stable and consistent light source, ensuring accurate and reliable results. The lamp also produces a broad spectrum of light, covering the UV, visible, and near-infrared ranges, making it suitable for a wide range of applications. Additionally, the Halogen lamp has a long lifespan, reducing the need for frequent lamp replacements.
How do I replace the Halogen lamp in my NANOCOLOR® UV/VIS II or NANOCOLOR® VIS II instrument?
Replacing the Halogen lamp in your NANOCOLOR® UV/VIS II or NANOCOLOR® VIS II instrument is a simple process. First, make sure the instrument is turned off and disconnected from the power source. Open the lamp compartment door, typically located on the front or top of the instrument. Carefully remove the old lamp by unscrewing it from its socket and disconnecting any wiring. Insert the new lamp into the socket and secure it in place by tightening the screws. Close the lamp compartment door and power on the instrument to ensure the new lamp is working properly.
How often should I replace the Halogen lamp in my NANOCOLOR® UV/VIS II or NANOCOLOR® VIS II instrument?
The frequency of Halogen lamp replacement depends on several factors, including the usage of the instrument and the specific requirements of your applications. In general, it is recommended to replace the lamp every 1000-2000 hours of use or if you notice a decrease in the intensity of the light source. Regular maintenance and calibration of the instrument can help prolong the lifespan of the Halogen lamp and ensure optimal performance.
Are there any precautions I should take when handling the Halogen lamp in my NANOCOLOR® UV/VIS II or NANOCOLOR® VIS II instrument?
When handling the Halogen lamp in your NANOCOLOR® UV/VIS II or NANOCOLOR® VIS II instrument, it is important to take certain precautions to ensure your safety and the proper functioning of the instrument. Always make sure the instrument is turned off and disconnected from the power source before replacing the lamp. Avoid touching the lamp with bare hands, as oils and residues from your skin can damage the lamp. Use gloves or a clean cloth to handle the lamp and avoid touching the glass surface. Additionally, be careful not to over-tighten the screws when installing the lamp to prevent damage to the socket.
